Precautions for using ball screw

The ball screw should be said to belong to a compact machine tool part. Therefore, when it is used, only careful attention should be paid from many aspects to ensure its normal use and ensure its service life. Here, we will understand the precautions for the use of ball screws.

　First, before use, it is necessary to check the lubrication state of the screw well, because if the ball screw is in a poor lubrication state, the function of using the ball screw will be lost in a short time. It can also be said that due to the serious occurrence of wear, its function is lost.

   Second, once the ball screw is coated with lubricating oil, it should be used directly, but it should be noted that there will be more dust adsorbed on it during use, if not cleaned in time Clean, it will cause other problems in use. At this time, the correct operation method is to use clean numbness, and then use some white kerosene for scrubbing, and then apply lubricant to it for the next use. When re-lubricating, be sure not to mix the lubricant.

   Third, in the process of use, no matter what kind of use problems occur, non-professional personnel must not disassemble the screw, because the improper operation, the simplest is that dust will enter the screw, so that The accuracy of using ball screws is affected.

   Finally, once the reassembled screw has an assembly error, such a screw loses its value in use. For the ball screw that has a problem, the correct way is to ask professional knowledge to carry out maintenance treatment.